home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
INFO
/
DRDOSTIP.ZIP
/
1612.TXT
< prev
next >
Wrap
Text File
|
1992-01-02
|
1KB
|
43 lines
Document 1612
GLYPHIX
EM
01/02/92
Description:
Glyphix has been tested with DR DOS 6.0 and it exhibits the same
symptoms that it did with DR DOS 5.0, ie. "GX" mode still does
not work with the HP LaserJet. It is recommend that end-users
change to GXL or GXS to start Glyphix.
If the you are using a Hewlett-Packard Series II, IID, or IIIP,
you should be aware of the following restrictions:
GLYPHIX laser font package for WordPerfect 5.1 has three modes of
operation. The user can choose any of the three modes when
starting the application. Two of the modes are successful with
DR DOS. The third is not.
These two modes run well under DR DOS...
GXL.EXE
This is the fastest mode, but it requires the most
memory. (Which is no problem when you use DR DOSs
memory features). Takes 110K of memory & can print
3-120 point sizes. Allows background printing.
GXS.EXE
The smaller memory version of GXL.EXE. Allows you to
print up to 60 point, and takes approximately 59K of
memory. Allows background printing.
The following mode is not compatible with DR DOS. It will
not print correctly on the HP printers listed above.
GX.EXE
Requires about 26K of memory. Also requires over 500K
of disk space to create a temp print file.
If the customer is using a Hewlett-Packard Deskjet, the Deskjet
driver for Glyphix has no problems.